HOW TO USE THE HD101 SPRAYER?
STEP 2 - ATTACHING THE WAND
4
STEP 3 - OPEN THE TANK
STEP 1 - UNBOXING
Open the box to find your HD101 unit, wand,
and accessory bag.
While holding the larger funnel bowl in one hand, turn
the pump handle counterclockwise to unscrew it.
Once unscrewed, remove the pump assembly, which
includes the black tube connected to the pump handle.
Hand-tighten this connection as using tools may result in damage
to the plastic. Leaks are often caused by incomplete insertion of
the wand into the handle. If you notice drips, loosen the
connection, twist the wand while pushing it into the valve handle,
and then retighten the connection.
Fully insert the wand into the valve handle. A twisting
motion often helps ensure a complete fit.
Tighten the black compression nut onto the valve
handle, turning clockwise.
Lower the sprayer handle into the slots at the base of the
orange pump housing.
To Next Page
