How to stop my Petsafe Pawz Away Pet Care Product from stimulating my pet indoors?
If your pet receives stimulation while indoors, remove the Receiver Collar before bringing your dog inside. You can also adjust the Barrier Transmitter range to decrease the Barrier Area size, or move the Barrier Transmitter or Boundary Wire further from your house.
What to do if my Petsafe Pet Care Product pet seems to receive no stimulation?
If your pet seems to receive no stimulation, first check or replace the batteries in the Receiver Collar. Then, use the Test Light Tool to check for static correction. Finally, check the Receiver Collar fit to ensure the Contact Points have direct skin contact.
How to increase the Barrier Area range on my Petsafe Pet Care Product?
To increase the Barrier Area range on your PetSafe Pet Care Product, you can check or replace the batteries in the Receiver Collar. Alternatively, adjust the Barrier Transmitter range to increase the Barrier Area size.
How to fix a Petsafe Pawz Away Pet Care Product barrier transmitter that does not appear to work?
If the Barrier Transmitter does not appear to work, check the segment indicator on the Barrier Transmitter. Also, check or replace the batteries in the Barrier Transmitter. You might also need to increase the Barrier Area range on the Barrier Transmitter.
What to do if my Petsafe Pet Care Product receiver collar is not picking up the signal (wire option only)?
If the Receiver Collar is not picking up the signal, check or replace the batteries in the Receiver Collar. Use the Test Light Tool to check for static correction. Change the switch inside the transmitter to Internal and check the transmitter. Check the wire connection to the transmitter to ensure the connection has not come loose or is corroded. If there is corrosion, cut out the corroded wire and reconnect the wire to the transmitter. If the connection is secure and there is no corrosion, then you have a break in the Boundary Wire. To locate the break, check the boundary for any signs of damage. Once you have found the break, replace the damaged section of Boundary Wire with new Boundary Wire. Turn the transmitter on and test the system before re-installing the Boundary Wire.
How to decrease the Barrier Area range on my Petsafe Pet Care Product?
To decrease the Barrier Area range, adjust the Barrier Transmitter range to decrease the Barrier Area size.
Why can't I hear the receiver collar tone on my Petsafe Pawz Away Pet Care Product?
If you are unable to hear the Receiver Collar tone, check or replace the batteries in the Receiver Collar. Note that pets easily hear the tone, but it may be a volume level that is difficult for you to hear. You can also use the Test Light Tool to check the Receiver Collar for static correction.
What to do if there are no segments on my Petsafe Pawz Away Barrier Transmitter?
If there are no segments on the Barrier Transmitter, press the UP (+) arrow button. Also, check or replace the batteries in the Barrier Transmitter.
General| Power Source | Battery |
|---|---|
| Product Category | Pet Containment |
| Brand | PetSafe |
| Model | Pawz Away |
| Product Type | Pet Barrier |
| Adjustable Settings | Yes |
| Technology | Radio Frequency |
| Adjustable Correction Levels | Yes |
| Pet Size | All Sizes |
Lists essential items required for the system setup.
Lists specific items for custom boundary wire installation.
Defines important terms used in the guide.
Instructions for installing batteries in the transmitter.
Steps to configure the transmitter's range and turn it on.
Procedure to verify the operational range of the barrier.
Guidance on properly attaching and adjusting the collar.
Instructions for properly threading the collar strap.
Information on battery type and replacement for the receiver.
Planning the placement of the transmitter and wire path.
Safety warnings and considerations before installing wire.
Tips for creating effective boundary wire turns and avoiding gaps.
Examples of common boundary wire configurations.
Steps to connect the boundary wire to the transmitter unit.
How to test the barrier range when using the wire option.
Instructions for installing the boundary wire.
Instructions for burying the boundary wire in a trench.
Methods for attaching the wire to fences and other surfaces.
Explains the collar's Time Out feature and its behavior.
Initial steps for training the pet with the system.
Advanced techniques for pets needing more guidance.
Key notes regarding pet health and system suitability for training.
Guidelines on appropriate usage and pet suitability.
Regulatory compliance for FCC, Canada, and Australia.
Contact information for international customer support.
Key warnings about system limitations and pet safety.
To Next Page