20 1-800-732-2677
Test Light Instructions
1. Make sure the Receiver Collar battery
is properly installed. Set the Correction
Level to 2 or above.
2. Hold the Test Light Contacts to the
Contact Points (I).
3. Walk toward the Boundary Wire with
Contact Points pointing up and holding
the Receiver Collar at your pet’s neck level
(J) until the Receiver Collar tones and the
I
Test Light flashes (K).
J
B
o
u
n
d
a
r
y
Z
o
n
e
Pet
Area
K
To Next Page