8 1-800-732-2677
Operating Guide
Prepare the Receiver Collar
Your Receiver Collar comes with short Contact
Points. Long Contact Points for pets with long or
thick hair are available through our Customer Care
Center. Tighten the Contact Points using Test Light
Tool (A) one-half turn beyond finger tight. Check
the tightness weekly.
A
To Insert and Remove
the Battery
Note: Do not install the battery while
the Receiver Collar is on your pet.
1. Remove the screws with a Phillips
screwdriver.
2. Remove the Battery lid (B).
B
C
To Next Page
Loading...
