EasyManua.ls Logo

Petsafe SSSCAT - Deterrent Operation and Placement; Placement and Environmental Considerations; Powering On and Battery Status

Petsafe SSSCAT
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Place the spray deterrent near an area
you would like your pet to avoid, such
as a rubbish bin or a worktop. The spray
range is about 0.9 metres.
Choose an indoor location where the
temperature is between 15°C and 27°C.
To prevent false activations, do not place
the spray deterrent in direct sunlight or
near a heating or air conditioning vent.
To turn the spray deterrent on, press and
release the power button; the LED will
glow green.
The spray deterrent will go through a
30-second warm-up sequence, during
which the LED will flash (green or red) 3
times every 5 seconds to indicate current
battery status.
After warm-up, the LED will flash once
every 30 seconds. When the LED flashes
red, it’s time to replace the batteries.
5 6
ENFRDEITESNLDASVPLHU

Related product manuals