What causes no display on the Petsafe Pet Care Product fence transmitter?
Verify that the transmitter power is turned on. Also, verify that the batteries are installed correctly. If the display is still not on, try replacing the batteries.
What does it mean when Petsafe YardMax Cordless In-Ground Fence has a system problem?
Move the boundary wire farther away from the neighboring containment system.
General| Type | In-Ground Fence |
|---|---|
| Power Source | Battery |
| Collar | Included |
| Neck Size | 6 - 28 inches |
| Number of Pets | Unlimited with additional collars |
| Waterproof Receiver | Yes |
| Correction Type | Static |
| Fence Wire Included | Yes |
| Battery Life | Up to 3 weeks |
| Wire Gauge | 20 gauge |
| Waterproof Rating | Waterproof Collar |
| Training Modes | Tone, Static |
| Number of Correction Levels | 5 |
Overview of the transmitter's buttons, LED display, and indicator icons.
Outlines the four key stages for setting up and using the pet containment system.
Key steps for installing the transmitter, charging the collar, and preparing the yard.
Details the features and ideal uses of the YardMax® mode for pet containment.
Explains the Traditional mode, including its ability to create off-limits areas.
Step-by-step instructions for using splice capsules to connect boundary wires.
Testing the collar and boundary in Traditional mode for proper setup and width.
Instructions for safely burying the boundary wire to protect it and ensure system integrity.
To Next Page