Pettersson D500X - Settings menu overview; USER PROFILES; RECORDING SETTINGS; TIMERS

6
Settings menu overview
PROFILE2
----------------------------------
CF1: M00337 (6.367G)
READY
----------------------------------
dB …
CF …
2013/05/31 18:05:20
D500X SETTINGS
---------------------------------------
1-USER PROFILES
2-RECORDING SETTINGS
3-TIMERS
4-TIME SETTINGS
5-DISPLAY
6-UTILITIES
PROFILE = USER0
---------------------------------------
SAMP. FREQ = 500
PRETRIG = 1
REC. LEN = 5
HP-FILTER = YES
AUTOREC = YES
T. SENSE = VERY HIGH
F1
Use
↑
↓
to switch between
parameters and ← →
to change
the values.
Press ENTER to save changes
and return to READY screen.
Use
←
→
to switch between
recording profiles
ABSOLUTE TIMERS
---------------------------------------
ON OFF
ATIMER1 18:10 04:40
ATIMER2 --:-- --:--
ATIMER3 --:-- --:--
ATIMER4 --:-- --:--
TIME SETTINGS
---------------------------------------
DATE : 2013-05-31
TIME : 17:23
ZONE : +01
LAT : 59 38 41 N
LON : 017 38 20 E
DST : EUR 0331 1027
DISPLAY
---------------------------------------
MODE = AUTO
TIMEOUT = 10
BRIGHTNESS = 128
UTILITIES
---------------------------------------
1-SHOW CF PROPERTIES
2-SHOW CF TIMING
3-FORMAT CF-CARD
4-BATTERY SETTINGS
RECORDING SETTINGS
---------------------------------------
INPUT GAIN =45
TRIG LEV =36
INTERVAL =5
SAMP. FREQ = 500
PRETRIG = 1
REC. LEN = 5
HP-FILTER = YES
AUTOREC = YES
T. SENSE = VERY HIGH
ENTER
Use
↑
↓
to switch between
parameters and ← →
to change
the values.
Press ENTER to save changes
and return to READY screen.
Use
↑
↓
to switch between
timers and 1/0 key to activate
the timer. ← → to change the
values.
Press ENTER to save changes
and return to READY screen.
The sun set/rise time are
automatically calculated from
the Time Settings.
Use
↑
↓
to switch between
parameters and ← →
to change
the values.
Press ENTER to save changes
and return to READY screen.
Use
↑
↓
to switch between
parameters and ← →
to change
the values.
Press ENTER to save changes
and return to READY screen.
CF PROPERTIES and CF
TIMING for advanced users
only.
FORMAT CF-CARD will
erase all data on the card.
BATTERY SETTINGS used to
set battery low warning and
s
hutdown voltages.
1
2
3
4
5
6
RELATIVE TIMERS
---------------------------------------
ON OFF
RTIMER1 +00:15 -00:15
RTIMER2 --:-- --:--
RTIMER3 --:-- --:--
RTIMER4 --:-- --:--
SET/RISE 21:35 03:55
or