04
Selecting a station
The exterior environment (hills, buildings, tunnel, car park,
below ground...) may prevent reception, even in RDS alternative
frequencies mode. This phenomenon is normal in the propagation
of radio waves and is in no way indicative of a fault with the audio
system.
Select "FM".
Press on "Audio source" to display the
carousel of sound sources.
Select the "Station" tab then select a radio
station from the stations received.
If necessary, select change of source by
pressing on the "Audio source" shortcut in the
upper bar of the carousel.
Select "AM" or "DAB"*.
Select "FM radio conguration" then "Update
the list of stations" to refresh the list.
RADIO
190
* Depending on equipment.