49
3
Comfort
Your vehicle is fitted with a fixed one-piece cushion bench rear seat, and depending on version:
- a folding split (50/50) backrest,
- a folding one-piece backrest.
When not in use, or before folding the seat
backrest(s), stow the rear seat belts by
inserting their tongues in the dedicated holders,
located on the side pillars.
The seat backrest is folded from the rear of the
vehicle, with the boot open.
F Place the head restraints in the low
position.
Refer to the "rear head restraints" section.
F Pull the strap(s) A, located behind the seat
backrest(s) to release them, and lay them
on the seat cushion.
Rear seats
Stowing the seat belts Folding the seat backrest
F Unfold the backrest to the rear and engage
it on the anchorage B.
F Ensure that the seat back has locked in
place correctly.
Returning the backrest of the
bench seat to its initial position
3-door 5-door
To Next Page
Loading...
Need help?
General
