32
Access
Battery ref.: CR 2016 / 3 volts.
F Unclip the cover using a small screwdriver
in the cut-out.
F Lift of the cover.
F Remove the old battery from its housing.
F Fit the new battery in its place, observing
the direction of fitment.
F Clip the cover in place.
Changing the remote
control battery
Do not discard the remote control
batteries, they contain metals which are
harmful to the environment.
Take them to a PEUGEOT dealership,
or to an approved collection point.
Electronic engine immobiliser
This locks the engine management system as soon
as the ignition has been switched off and therefore
prevents starting of the vehicle by anyone who does
not have the key.
The ignition key has an electronic chip which has a
special code. When the ignition is switched on, the
code must be recognised for starting to be possible.
In the event of a malfunction, your vehicle will not
start.
Contact a PEUGEOT dealer or a qualified
workshop.
Do not make any modifications to the
electronic immobiliser system.
To Next Page
Loading...
Need help?
General
