1. Direction indicators (P 21 W).
2. Reversing lights (P 21 W),
3. Brake lights (P 21 W).
4. Side lights (x 2) (R 5 W).
Using a 10 mm box spanner, un-
screw the 2 fixing nuts 1.
Release the lamp unit by pushing
it outwards.
Squeeze the two tabs 2 to release
the bulb holder.
Change the faulty bulb.
When refitting, ensure that the
lamp unit seal has been put back
in place correctly.
These 6 bulbs are changed from in-
Move aside the boot trim to ac-
Press the two tabs and remove
When refitting, take care to pass the
Third brake light (saloon)
(4 W 5 W bulbs)