PEUGEOT 407 User Manual

1010
119
Integrated direction indicator side
repeaters
CHANGING A REAR BULB
(SALOON)
Third brake light:
Five W 5 W bulbs.

Remove the plastic cover carefully
by unclipping it at the centre and on
either side, perpendicular to its di-
rection of engagement.

Press on the two tabs located at
the rear, near the rear screen.

Pull the red transparent cover out-
wards while maintaining the pres-
sure on the tabs.

Change the faulty bulb.

When refitting, ensure that the
tabs of the red transparent cover
are engaged correctly and that the
upper trim has been put back in place
correctly.

Screw on the light fixing nuts inside
the boot using the towing eye, if
necessary. When refitting, ensure
that the light is positioned and fixed
correctly.

Reconnect the connector.
Number plate lights:
W 5 W.

Remove the transparent cover
using a screwdriver blade.

Change the faulty bulb.

Push the repeater forwards or
backwards and release it.

Unclip the repeater and change it.
Repeaters can be obtained from
PEUGEOT dealers.
Amber coloured bulbs (direction indi-
cators and side repeaters), must be
replaced with bulbs of identical speci-
fication and colour.
1 - Direction indicators:
PY 21 W (amber).
2 - Reversing lights:
P 21 W.
3 - Fog lamps/side lights:
P 21/4 W.
4 - Side lights:
P 21/4 W.
5 - Brake lights/side lights:
P 21/4 W.

Disconnect the connector.

Unscrew the light fixing nuts in-
side the boot using the towing eye
(stored inside the spare wheel), if
necessary.

Remove the seal.

Unclip the bulb holder moving aside
the 5 tabs.

Unscrew the bulb and change it.

Lock the bulb holder in place.

Reposition the seal.

PEUGEOT 407 Specifications

General

Brand	PEUGEOT
Model	407
Category	Automobile
Language	English