PEUGEOT 508 User Manual

8
207
Practical information
508_en_Chap08_info-pratiques_ed02-2014
Changing a fuse
Procedure for replacing a failed fuse with a new fuse to rectify a failure of the corresponding function.
The extraction tweezer and spare fuses are
located in the glove box.
Access to the tools
Before changing a fuse, the cause of the failure
must be identified and rectified.
F Identify the failed fuse by checking the
condition of its filament.
Changing a fuse
Good Failed
F Use the special tweezer to extract the fuse
from its housing.
F Always replace the faulty fuse with a fuse
of the same rating.
F Check that the number marked on the
fusebox, the rating marked on the fuse and
the following tables all agree.
PEUGEOT will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of
accessories not supplied and not
recommended by PEUGEOT and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected
exceeds 10 milliamperes.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a PEUGEOT dealer or
a qualified workshop.

PEUGEOT 508 Specifications

General

Brand	PEUGEOT
Model	508
Category	Automobile
Language	English