PEUGEOT Satelis 400 User Manual

MISCELLANEOUS OPERATIONS
68
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
 Removal of the lambda sensor
- Remove the RH fairing. See: Procedure 3.
Page: 32.
- Disconnect the lambda sensor.
- Using a box-end wrench, remove the
lambda sensor.
Tightening torque: 2.5 m.daN
Note: When reinstalling, lubricate the
threads (A) of the sensor with gra-
phite grease.
In order not to damage the Lambda sensor, never lubricate or clean the end piece (B) which is
exposed to the exhaust gas.

Removal of the regulator
- Remove the RH footboard. See: Procedure 6.
Page: 34.
- Disconnect and remove the regulator. (1)
A
B
1

PEUGEOT Satelis 400 Specifications

General

Displacement	399 cc
Fuel System	Electronic Fuel Injection
Cooling System	Liquid-cooled
Transmission	Automatic CVT
Rear Suspension	Dual shock absorbers
Front Brake	260 mm disc, dual-piston caliper
Rear Brake	210 mm disc, single-piston caliper
Seat Height	790 mm
Fuel Capacity	13.5 liters
Width	775 mm
Engine Type	Single cylinder, 4-stroke
Front Suspension	Telescopic fork
Maximum Torque	38.1 Nm at 5, 500 rpm
ABS	Optional
Weight	215 kg
Top Speed	140 km/h
Power	26.5 kW (36 hp) @ 7, 500 rpm