Need help?Do you have a question about the PEUGEOT XS1P52QMI-4 and is the answer not in the manual?
Steps for draining and replacing engine oil, including filter cleaning and O-ring replacement.
Steps to remove the drive pulley, including using a fixed flange tool and removing the nut.
Procedure for removing the driven pulley by locking the clutch drum and removing the nut.
Steps to remove the clutch lining assembly, including measuring lining thickness.
Procedures for refitting the clutch lining assembly, including greasing and tightening.
Steps to remove the starter system components like the plate, kick starter sector, and washers.
Guide for reassembling the starter system, including spring placement and securing components.
Instructions for draining relay box oil and removing the secondary transmission cover and shafts.
Steps to remove the throttle valve components like the chamber cap, spring, and needle assembly.
Instructions for removing the float chamber, O-ring, and jets.
Steps to remove the magneto flywheel, including carburettor removal and gasket replacement.
Procedure for setting engine timing by aligning marks on the magnetic wheel and camshaft gear.
To Next Page
General
