To Next Page
C
Chris CarlsonAug 18, 2025
What to do if my PEZTIO K11 is not responding?
- HhenryrobinAug 18, 2025
If your PEZTIO Dash Camera is unresponsive, try resetting it.
What to do if my PEZTIO K11 is not responding?
If your PEZTIO Dash Camera is unresponsive, try resetting it.
Why nothing happens when I press the MENU button on my PEZTIO K11?
This is normal during recording. Stop the recording before pressing the MENU button on your PEZTIO Dash Cameras.
What to do if the SD card cannot be read by my PEZTIO K11 Dash Cameras?
To resolve issues with your SD card not being read by your PEZTIO Dash Cameras, use a good quality branded SD card between 8GB and 32GB (Class 10 or UHS type 1) and format the card within the Setup menu.
How to fix the incorrect date & time on my PEZTIO K11?
To fix incorrect date and time on your PEZTIO Dash Cameras, calibrate it in the settings. The initial time reflects when the product left the factory.
Why my PEZTIO K11 Dash Cameras get heated after use?
The camera has metal frame with good thermal conductivity for extended life of cam. The Operating temperature is designed between -10? to 60?, so don’t worry, it is a common phenomenon.
What to do if the images displayed in the screen is upside down on my PEZTIO K11?
If the images displayed on the screen of your PEZTIO Dash Cameras are upside down, it might be mounted on the dashboard. Mount it on the windshield as shown in the instructions.
How to remove the memory card from my PEZTIO K11?
To remove the memory card from your PEZTIO Dash Cameras, push the card further inwards slightly until you hear and feel a small latch. Release pressure, and the card will spring out. If you have difficulty, use the edge of a small coin.
How to resolve blurred video image on PEZTIO K11 Dash Cameras?
To resolve a blurred video image on your PEZTIO Dash Cameras, remove the protective lens cover, clean the lens, and clean the windscreen.
How to insert the memory card in my PEZTIO K11?
Micro SD card is very small and requires delicate use. Align the card with the diagram shown upon instruction and insert the card until you feel a slight spring resistance. You now need to push the card, using your finger nail, until you hear and feel a small latch. Release pressure and the card will stay retained within the device. Use the edge of a small coin if you have difficulty.
Why does the screen blank after a few minutes on my PEZTIO K11 Dash Cameras?
If your PEZTIO Dash Cameras screen blanks after a few minutes, the screen saver is set to ON. Change the settings to OFF if required; the default setting is off.
Use car charger for power; battery is small capacity for backup.
Explains loop recording and emergency record features like motion and gravity sensors.
Steps for mounting the dash cam on the windshield, including cleaning and cable routing.
Configures video recording parameters like resolution, loop recording, and exposure.
Details on the G-sensor's collision detection and the parking monitoring function.
Solutions for issues with memory card removal, reading, insertion, and file deletion.
General| Frame Rate | 30 fps |
|---|---|
| GPS | No |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Parking Mode | Yes |
| Night Vision | Yes |
| Video Resolution | 1920x1080 |
| Lens | Wide-angle |
| Display | 3-inch LCD |
| Storage | MicroSD up to 256GB |
