While Sewing
• Sew right sides together
• So the seam is hidden in the inside of the work
piece
• Use seam allowance (= distance between seam and
edge of fabric) of about 0.5-1 cm (use the edge of
presser foot as a guide)
• Secure your stitch at the beginning and end
• Make a few stitches backwards on top of the
previous stitch
• Never pull or push the fabric
• The fabric will move on its own, just gently steer
it to the right direction
• For sharp corners: lift the pressure foot and turn the
work piece
When finished
• Scrap piece of fabric
underneath presser
foot
• Presser foot down
• Needle stuck in
To Previous Page
Loading...
