Need help?Do you have a question about the Pfaff 1183-712/02 and is the answer not in the manual?
General| Brand | Pfaff |
|---|---|
| Model | 1183-712/02 |
| Category | Sewing Machine |
| Language | English |
Machine construction according to European regulations. Observe statutory and environmental regulations.
Operate only by trained operators after reading the manual. Follow all safety instructions on the machine.
Explains the meaning of danger and caution symbols used throughout the manual for user safety.
The manual is integral; instruct personnel, ensure correct operation, and do not deactivate safety mechanisms.
Defines responsibilities for operating and specialist personnel regarding machine safety and maintenance.
Responsibilities of operating staff: follow safety notes, avoid loose clothing, report safety issues.
Responsibilities of technical staff: follow safety, switch off power before adjustments, and use approved parts.
Emphasizes keeping the working area clear, avoiding the sewing area, and not leaving objects on the table.
This machine is designed for industrial tacking and basting work only. Any other use is considered inappropriate.
Provides detailed technical specifications including stitch type, needle system, dimensions, speed, and power.
Lists different models and subclasses, including additional equipment like the thread trimming device.
The customer is responsible for proper disposal according to local environmental regulations.
Machines are delivered completely packed to the customer's premises.
Manufacturer bears no liability for transport within customer premises; ensure machines are transported upright.
Details packaging materials and states that proper disposal is the customer's responsibility.
Instructions for storing the machine up to 6 months, protecting it from dust, moisture, and corrosion.
Explains the meanings of common symbols used in the manual, such as 'Note', 'Cleaning', and 'Servicing'.
Describes the function and operation of the main power switch for turning the machine on and off.
Details the functions of the pedal: neutral position, sewing, and thread cutting for specific models.
Provides an overview of the control panel, including display, function keys, and status indicators.
Explains how activated functions and parameter inputs are shown on the screen display.
Details how to use the function keys to switch machine functions on/off and adjust values.
Requirements for machine location, stable surface, and adequate lighting for mounting.
Step-by-step instructions for adjusting the height of the table top.
Instructions for mounting the thread stand (Garnrollenständer) according to the diagram.
Guidance on connecting plugs, earth cables to the control box, sewing head, and motor.
Covers the start inhibitor, including its mounting and function verification.
Detailed steps for correctly mounting the start inhibitor switch on the machine.
Procedure to check the start inhibitor's functionality by observing an error message.
Steps for configuring the machine's drive unit parameters via the control panel.
Essential checks before operation: cables, cleaning, voltage compatibility, and proper connection.
Instructions on how to switch the machine on and off using the main power switch.
Provides precise technical drawings with dimensions for creating the table top cutout.
Diagram and guidance for correctly mounting the table top onto the machine stand.
Step-by-step instructions for properly inserting the sewing machine needle.
Procedures for winding bobbins and adjusting the bobbin thread tension correctly.
Instructions on how to safely remove and insert the bobbin case.
Guide to inserting the bobbin and adjusting its thread tension for optimal sewing.
Detailed steps for threading the needle and adjusting the needle thread tension.
Instructions for regular cleaning of the machine, focusing on the hook and compartment.
Procedure for topping up the oil tank with recommended sewing machine oil.
A list of the most important wearing parts with their corresponding part numbers.
To Next Page
