8 - 7
Mounting and commissioning the machine
8.06 Switching the machine on/off
● Switch the machine on (see Chapter 7.01 Main switch).
8.05 Commissioning
● Examine the machine, in particular the
electric cables for any damage.
● Clean the machine thoroughly, see also
Chapter 10 Care and Maintenance.
● Have qualified personnel check whether
the machine can be operated with the
available voltage and whether it is
connected properly. If there are any
irregularities do not operate the machine
under any circumstances.
● Before commissioning the machine
remove plug 1 from the oil tank 2.
Plug 1 serves as a safety
device for transportation and
should not be used during
sewing operations.
Fig. 8 - 05
1
2
To Next Page
Loading...
