8 - 6
Mounting and commissioning the machine
TE
700 5
C
● By operating the pedal, sew one stitch.
● Turn the balance wheel in the direction of sewing until the tip of the needle is level with
the top edge of the needle plate.
● By pressing the corresponding +/- key, call up parameter "702".
● By pressing the corresponding +/- key, enter the value "80".
● Conclude the adjustment of the sewing motor by pressing the TE/Speed key.
TE
702 80
C
● By pressing the corresponding +/- key, call up parameter "703".
● By pressing the corresponding +/- key, enter the value "226".
TE
703 226
C
To Next Page
Loading...
