Need help?Do you have a question about the Pfaff 28 and is the answer not in the manual?
General| Brand | Pfaff |
|---|---|
| Model | 28 |
| Category | Sewing Machine |
| Language | English |
Procedure to engage the sewing mechanism by turning the lock nut clockwise on the balance wheel.
Procedure to disengage the sewing mechanism by turning the lock nut counter-clockwise for bobbin winding.
Detailed steps for threading the needle from spool through guides, tension discs, and eyelet.
Instructions for using the table winder, including spool placement, bobbin threading, and engagement.
Steps to raise the shuttle race cap and remove the bobbin from the shuttle by opening it.
Procedure for inserting the full bobbin and drawing the thread through the tension spring correctly.
Steps to draw up the bobbin thread by slowly turning the balance wheel to bring it through the needle hole.
How to adjust needle thread tension by turning the tension nut clockwise or counter-clockwise.
How to adjust bobbin thread tension using the small screw driver on the bobbin case.
Selecting the correct needle size and type is imperative for perfect seams in leather work.
Push the needle up in the needle bar as far as it will go and fasten securely.
How the stitch regulator lever and thumb screw set stitch length and enable reverse feeding.
Common reasons for skipping stitches, including needle insertion, system, bending, threading, and inadequacy.
Potential causes for thread breakage, such as tension, thread quality, oiling, and jamming.
To Next Page
