Pfaff 360 - Thread Tension and Bobbin

t1heain 9
Place
spool of thread on spool
pin I and lead thread
end through
both thread
retainer
openings
2 (see illustration opposite).
Lead
thread
clockwise around
tension and pull
it between any two
of
the
tension discs
3.
Bring take-up lever
4 as high as it
will
go and
pass
thread
from right
to left
through one
of
the holes at its end. Pull thread
into slots
at
left
of
thread guides
5 and 6
and
then into the stot at left
of needle clamp
7.
Then thread
needle, front to back. The
automatic
needle threader will
do this for you
easily
and
quickly.
14