1:2
Introduction
TABLE OF CONTENTS
1. Introduction
Utility stitches expression 2028 1:4
Utility stitches expression 2028 1:5
Decorative stitches 1:6
2. Preparations
Carrying case 2:1
Lid 2:1
Electrical connection 2:2
Connecting the foot control 2:2
Voltage Switch 2:2
Accessory tray 2:3
Removing the accessory tray 2:3
Bobbin winding 2:4-5
Thread tension 2:6
Inserting the bobbin 2:6
Threading the needle 2:7
Integrated Needle threader 2:8
Presser foot lifter 2:8
Drawing-up the bobbin thread 2:9
Bobbin thread 2:9
Thread cutter 2:9
Changing the presser foot 2:9
Setting the needle thread tension 2:10
Winding a bobbin through the needle 2:10
Changing the needle 2:12
Threading the twin needle: 2:12
The IDT (Integrated Dual Feed) 2:13
Lowering the feed dog 2:13
3. Sewing
Stitch selection 3:1
Altering stitches 3:1
Altering the stitch width 3:1
Altering the needle position 3:1
Altering the pattern width e.g. Stitch 25 3:2
Altering the stitch/pattern length 3:2
Altering the stitch density 3:2
Balance 3:3
Reverse sewing 3:3
“Pattern mirror” 3:3
"Lock" button 3:4
Twin needle 3:4
Explanation of the sewing
recommendations table 3:6
Sewing in zippers 3:6
Basting stitch 3:7
Top stitching 3:7
Blind hem stitch 3:8
Overlock stitches 3:9
Free Motion Sewing 3:10
Bridging stitch 3:11
Cross hem stitch 3:11
Rolled hem with hemmer No. 7 3:12
Shell edging 3:12
Buttonholes 3:13
Inserting the sensormatic buttonhole
guide: 3:13
Attaching buttonhole foot 3:13
Fully automatic buttonhole 3:13
Semi-automatic buttonhole 3:14
Manual buttonhole 3:15
To Next Page
Loading...
Need help?
General
