8
● The following parts are now removed to the right (fig. 4):
1. Stitch length adjustment knob 4 and the regulator wheel 5 for the differential feed
2. Presser foot 6
● Remove the covers 7 on the stand cover.
● Unscrew and remove the fastening screws 8 on the stand cover.
● Remove the stand cover carefully to the right.
● Unscrew and remove both fastening screws 9.
● Slightly raise the arm cover at the front near the plus/minus keys until the covers are free.
● Remove the arm cover carefully toward the front.
To Next Page
Loading...
Need help?
General
