2:7
Technical section
Preparing the machine for bobbin winding
Place an empty bobbin so that the black pin of the bobbin
winder snaps into the slot of the bobbin. The Pfaff logo is
facing up.
Removing the accessory tray (free arm)
In order to sew using the free arm, swing the accessory
tray to the left and lift it upwards out of the hole. When
replacing the tray, make sure it is Á ush with the free arm of
the sewing machine.
Push the bobbin to the right.
Note: The bobbin can only be wound if it is moved fully to the
right
To Next Page
Loading...
Need help?
General
