4:10
0 4.0 - 2-3 -/0
Utility stitches
Sewing on buttons
With Button sewing program 0 you can easily sew on two
and four-hole buttons.
• Remove the presser foot and lower the feed dog.
• Mark the button position on your fabric. Place the button
on the marked fabric.
• Turn the handwheel towards you and position the
button so the needle enters the left hole in the button.
• Lower the presser foot lifter. The button will be held in
place by the shank of the foot. Turn the handwheel to
make sure the needle also enters the right hole of the
button.
• Continue sewing on the button. The machine will
complete the program for you.
Prog.
To Next Page
Loading...
Need help?
General
