6:7
ABC
AB C
Decorative sewing/Specialty techniques
Manual change/ Irregular pattern
• Place stabilizer under fabric.
• Set needle thread tension to 3. Select zigzag stitch 12 for
motifs with a right or left needle position or zigzag stitch
3 for motifs with a center needle position.
• Set stitch length to 0.2 - 0.3 mm.
• Using -/+ button A increase and reduce the width while
sewing.
Note: If you have selected the right or left needle position, the
stitch width only changes in one direction.
Try creating Á owers and leaves with this technique.
These larger embroideries are perfect for home decorating
projects like placemats, cushions and valances.
Manual change/ Regular pattern
• Place stabilizer under fabric.
• Set needle thread tension to 3. Select the zigzag stitch
needle position (stitch 12). Pressing the “Pattern mirror
button”
(16) will change the stitch from a right (C)
to left (A) needle position stitch. Zigzag stitch 3 is used
when a center (B) needle position motif is desired.
• Set stitch length to 0.2 - 0.3 mm. Begin sewing.
• With -/+ button A increase the width from 0 to 6 mm
and reduce it again to 0 mm.
Note: If you have selected the right or left needle position, the
stitch width only changes in one direction.
To Next Page
Loading...
Need help?
General
