Pfaff hobby 1142 User Manual

1:10
A
B
Operate your hobby 1142
Needle threader
Turn off the main switch.
To make threading the needle easier and
quicker, you have been provided with a
needle threader.
Lower the presser foot. Turn the
handwheel until the needle is at its
highest position.
Move the needle threader (A) completely
downwards and turn it towards the
needle so that the small hook B goes
through the needle eye from behind. Pull
the thread from the left around the guide
and under the hook.
Turn the needle threader towards the
rear, releasing the thread carefully, and
allow the threader to move upwards. A
loop of the thread is pulled up through
the needle eye.
You can now pull the thread through the
needle eye.

Pfaff hobby 1142 Specifications

General

Buttonhole	1-step
Stitch Width	5 mm
Stitch Length	4 mm
Needle Positions	Variable
Free Arm	Yes
Needle Threader	No
Drop Feed	Yes
Type	Mechanical
Number of Stitches	23
Bobbin Type	Front loading
Presser Feet Included	Standard foot, Zipper foot, Buttonhole foot