Pfaff hobby 1142 User Manual

1:14
A
B
5 4 3 2 1 0
Operate your hobby 1142
Adjusting stretch stitch balance
If the stretch stitches are uneven when
you sew on a particular fabric, correct
them by turning the stitch length dial.
Balancing stitches:
If the stitches are drawn out, correct them
by turning the dial in the “–” direction.
If the stitches are compressed, correct
them by turning the dial in the “+”
direction.
Stitch width dial
The stitch width can be adjusted with the
stitch width dial (A). Set the desired stitch
width number at the setting mark (B).
The higher the number, the wider the
stitch.
Straight stitch is sewn with stitch width 0.
Note: Do not turn the stitch width dial while
the needle is in the fabric, otherwise the needle
may bend or break.

Pfaff hobby 1142 Specifications

General

Buttonhole	1-step
Stitch Width	5 mm
Stitch Length	4 mm
Needle Positions	Variable
Free Arm	Yes
Needle Threader	No
Drop Feed	Yes
Type	Mechanical
Number of Stitches	23
Bobbin Type	Front loading
Presser Feet Included	Standard foot, Zipper foot, Buttonhole foot