4
Accessory box
Swing the work support
to
the left and
pull out the accessory box.
To
replace the accessory box, slide it
into the grooves and push it
until it
locks. The accessories are illustrated
on
page 29.
Electrical connection
Use this machine only on a flat surface
or on a special sewing table.
Attaching the foot control:
Insert
the plug of the control into the
machine
plug socket. Then connect the
mains
plug
to
a power source.
Caution: When the machine is not
in
use, disconnect plug from power
source.
Do
not place any objects on the
foot
control.
To Next Page
Loading...
