20
Lowering Feed Dogs
You can lower the feed dogs by moving
the switch at the back of the free arm to the
OHIW$0RYHWKHVZLWFKWRWKHULJKWLI\RX
wish to raise the feed dogs.
Note: The feed dogs will not raise immediately
when the lever is switched. Turn the handwheel
one full turn or start sewing to re-engage the
feed dogs.
Presser Foot Lift
The presser foot is lowered or raised with
WKHSUHVVHUIRRWOLIW%By raising the presser
foot lever as far as it goes the lift height of
the presser foot can be increased. This is
useful for easy removal of the presser foot
or when placing heavy fabrics under the
foot.
Changing the Presser Foot
Remove Presser Foot
Press the presser foot downwards until it
snaps off from the presser foot holder.
Attach Presser Foot
Place the presser foot under the presser foot
KROGHU$Line up the cross pin on the foot
%ZLWKWKHJDSLQWKHSUHVVHUIRRWDQNOH&
Lower the presser foot lifter and the presser
foot will snap into the presser foot holder.
Note: Check that the presser foot is properly
attached by raising the presser foot lift.
A
B
B
A
C
B