Pfaff synchrotronic 1229 User Manual

Upper threading
Raise presser bar lifter 37 to
its
horizontal
(K) position. Swing
spool
holder 13
back.
Place
a spool of
thread
on the holder and
push the unreeling disc on the spool pin.
The
accessories include
two
unreeling
discs, one for small spools, the other for
large spools. The large unreeling disc
is
always used together with the small
one.
Pull the thread from the spool and draw it
into
thread
guide
11,
slot
K,
thread guide
31,
take-up
lever 7,
thread guide 30 and
the right guide of needle holder 16.
Note on twin needles
For two-needle sewing jobs attach the
second spool holder for the second
spool
of thread (page 2).
Both
threads are passed through the
thread guides
together. However in slot
K
one
thread is placed above disc L, the
other below it, and
at
needle
holder
16,
one
thread
is pulled through the right
guide, the other through the left.
Twin needles are threaded by hand.

Pfaff synchrotronic 1229 Specifications

General

Brand	Pfaff
Model	synchrotronic 1229
Category	Sewing Machine
Language	English