Pfaff tiptronic 2030 Instruction manual User Manual

Threading the needle
Switch off the
master switch
Raise the presser
foot lifter
(51).
Place the
thread on the spool holder and
fit an unwin
ding
disk of the right size.
Using both hands,
pull the thread into thread
guide A from the front Place the
thread from
right to left into the
pre-tension device B. Now
pass
it
through
the
left hand-threading slot
downwards.
Pull the thread around the stop C
in the
right-hand threading slot and
upwards
to
the
take-up lever
(40).
The thread must be
pulled
into the take-up
lever from
left to
right
Pass the thread
downwards
in the
right-hand
threading slot
Pull
the
thread from the side
behind one
of the two thread guides D.
To thread the
needle,
please
refer to the next
page.

Pfaff tiptronic 2030 Instruction manual Specifications

General

Brand	Pfaff
Model	tiptronic 2030 Instruction manual
Category	Sewing Machine
Language	English