EasyManua.ls Logo

Pfannenberg DTI 8161 - Condensate

Pfannenberg DTI 8161
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
685408006G 34

During cooling, the moisture romoved from the hot air by the evaporator is collected as condensate. In order
to avoid any damage to the switch cabinet and the cooling unit, the condensate must be discharged.
The condensate is discharged in the following way:
In case of normal condensate drainage a reservoir (option) collects the condensate which is then drained by
means of a hose.
Always ensure that the condensate is drained properly (safety- drainage).
Excessive condensation can occur if, for example, the switch cabinet is not sealed or if the internal
temperature of the switch cabinet is frequently below the dew point.
Please check the sealing of the switch cabinet, if there is excessive condensate during the normal
operation.
In order to prevent the excessive condensate we recommend to install a door contact switch. It will switch off
the cooling unit when the switch cabinet door is open.

Related product manuals