Pfannenberg DTI 8161 - Page 37

685408006G 39
Cooling data
DTI/DTS 8161 IC
Cooling capacity at A35/A35 * **
Q
0
1000/1100 W
Cooling capacity at A50/A35 * **
Q
0
860/920 W
Refrigerant type/ Refrigerant amount *
R 134a/320 g
Thermostat setting, (factory set)
+33 °C (+91.4 °F)
Failure indication: Enclosure internal temp. (factory set)
> +45 °C (+113 °F)
Enclosure internal temp.
+18 °C (+64.4 °F) . . . +43 °C (+109.4 °F)
Air volume, external/ internal circulation °)
1200 /570 m³/h
Condensation discharge
Condensate discharge pipe. (Option: condensate evaporator)
Noise level (1m)
 68 dB(A)
Electrical data
Rated voltage&Mains frequency
230 V&50/60 Hz
Operating range
DIN IEC 60038
Power consumption *
P
el
A35/A35: 565/598 W (without option)
Option: Condensate evaporator(CM)
P
el
30-110 W (A35/A35 ca. 70 W)
DTI/DTS 8161 IC HS
DTI/DTS 8161 IC LAP
Current capacity *
I
nom max
4,2/4,7 A
9,2/10,1 A
Starting current *
I
Start max
17,5 A
28,0 A
Heatting capacity
/
1000 W
Ambient air temperature
+15 °C (+59 °F)
+55 °C (+131 °F)
-40 °C (-40 °F)
+55 °C (+131 °F)
Dimensions
Height X Width X Depth (standardwith front cover on) °°)
976 X 450 X312 mm
Installation depth DTI °°)
ca.64 mm
Weight(with front cover on)
DTI/DTS 8161
DTI/DTS 8161 LAP
40.7 kg
41.4 kg
Installation attitude
Vertical
Unit construction
Standard:Steel Option:Stainless
Corrosion protection
Standard:galvanized, electrostatically powder coated (200 °C)
Option:Stainless, Aluminium
Protection system according to EN 60529
IP54 against the enclosure, under correct operating conditions.
IP34 against the environment, under correct operatingconditions.