Pfeiffer Vacuum Adixen A1503H

Need help?

Do you have a question about the Pfeiffer Vacuum Adixen A1503H and is the answer not in the manual?

Summary

A Introduction

A 020 A3 H Series dry pump range

Details the different models within the A3H series dry pumps and their thermal management versions.

A 030 M4 monitoring system

A 040 Technical characteristics

B Start-up

B 000 Safety instructions

Provides essential safety guidelines regarding handling, electrical safety, and hazardous conditions.

B 001 Hook-up requirements

Outlines the necessary requirements for connecting the pump, including dimensions, weight, and utilities.

B 010 Unpacking; Handling; Storage

B 020 Positioning the pump in the pumping installation

B 025 Filling the machine oil housings

B 030 Connection to the cooling circuit

Explains how to connect the pump to the necessary cooling circuit, detailing water characteristics and connections.

B 040 Inert gas purge connection (N2 connection)

B 050 Electrical connection

Provides instructions for making the electrical connections to the pump, including circuit breaker ratings.

B 051 Checking the direction of rotation at initial pump start-up

Step-by-step guide to verify the correct rotation direction before initial startup using hand-held remote.

B 060 Connection to the pumping circuit

Outlines how to connect the pump to the main pumping circuit, specifying materials compatible with gases.

B 070 J14 Remote control plug connection

B 100 Emergency stop plug connection

Details the connection of the emergency stop plug for immediate shutdown and its wiring.

B 110 RS 232 or RS 485 link wiring

C Operation

C 000 Safety recommendations for harsh processes

Safety guidelines specifically for operating the pump in harsh process environments, including shutdown procedures.

C 010 Operating modes

C 020 M4 monitoring system parameters

C 040 Operating mode with HHR

C 041 Start-up of the M4 monitoring system

C 042 M4 monitoring system function table

C 043 Use of the M4 monitoring system for pumping operation

C 044 Saving and loading of pump configuration (with HHR)

C 060 Use of the power failure protection

C 090 Use of the serial link (M4 monitoring)

D Maintenance

D 000 Safety instruction related to maintenance

Crucial safety guidelines to follow during maintenance operations, covering electrical, chemical, and physical hazards.

D 010 First level of maintenance

D 030 Diagnosis and troubleshooting

Guides for diagnosing and resolving common issues with the pump, categorized by symptom.

D 400 Pump or Roots does not start

Troubleshooting steps when the pump or Roots booster fails to start, covering power, HHR, and display issues.

D 500 The pump is running and then is showing a warning or fault message

Procedures for handling warning or alarm messages displayed during operation, with troubleshooting steps.

D 600 The pump is running but the performances are not correct

Troubleshooting tips when the pump's performance is suboptimal, addressing vacuum, noise, and N2 purge issues.

E Maintenance sheet

E 011 Safety instructions for pump relocation

Safety precautions to be taken when moving or relocating the pump, covering electrical and hazardous energy risks.

E 012 Draining of the water cooling circuit

E 013 Saving and loading of the pump configuration

E 014 Disconnecting the pump from the installation

E 015 Conditioning the pump for shipping