What to do if my Pfeiffer Vacuum Water Pump shows an overload?
If your Pfeiffer Vacuum Water Pump displays an overload message, it indicates that the load is too high. To resolve this, reduce the load. It's possible that limited power is due to excess temperature.
Why does my Pfeiffer Vacuum HISCROLL 6 Water Pump show excess voltage?
If your Pfeiffer Vacuum Water Pump reports excess voltage, the cause may be an incorrect mains input voltage. Verify the mains input voltage. Note that this acknowledgement is only for rotational speed f = 0. If the issue persists, contact Pfeiffer Vacuum Service.
What to do if my Pfeiffer Vacuum Water Pump shows undervoltage or power failure?
If your Pfeiffer Vacuum Water Pump shows undervoltage or a power failure, the cause may be a mains failure. Check the mains input voltage.
Why is my Pfeiffer Vacuum Water Pump electronics overheating?
If the electronics in your Pfeiffer Vacuum Water Pump are overheating, or you see a message like 'Electronics high temperature', 'High power electronics temperature', it's likely due to insufficient cooling. Improve the cooling and check the operating conditions.
Why is my Pfeiffer Vacuum HISCROLL 6 Water Pump motor overheating?
If the motor in your Pfeiffer Vacuum Water Pump is overheating, or you see a message like 'Motor high temperature', it's likely due to insufficient cooling. Improve the cooling and check the operating conditions.
What causes excess temperature in my Pfeiffer Vacuum Water Pump?
If your Pfeiffer Vacuum Water Pump indicates 'Excess temperature, electronics', 'Excess temperature, motor', or 'Excess temperature, final stage', this is likely due to insufficient cooling. To resolve this, improve the cooling and check the operating conditions.
What causes excess temperature in my Pfeiffer Vacuum HISCROLL 6's motor?
If your Pfeiffer Vacuum Water Pump indicates 'Excess temperature, electronics', 'Excess temperature, motor', or 'Excess temperature, final stage', this is likely due to insufficient cooling. To resolve this, improve the cooling and check the operating conditions.
What causes excess temperature in the final stage of my Pfeiffer Vacuum Water Pump?
If your Pfeiffer Vacuum Water Pump indicates 'Excess temperature, electronics', 'Excess temperature, motor', or 'Excess temperature, final stage', this is likely due to insufficient cooling. To resolve this, improve the cooling and check the operating conditions.
What to do if my Pfeiffer Vacuum HISCROLL 6 has a pressure regulation error?
If your Pfeiffer Vacuum Water Pump displays a pressure regulation error, it means the target pressure cannot be reached. Try increasing or decreasing the gas load.
What causes high power electronics temperature in Pfeiffer Vacuum HISCROLL 6?
If the electronics in your Pfeiffer Vacuum Water Pump are overheating, or you see a message like 'Electronics high temperature', 'High power electronics temperature', it's likely due to insufficient cooling. Improve the cooling and check the operating conditions.
General| Brand | Pfeiffer Vacuum |
|---|---|
| Model | HISCROLL 6 |
| Category | Water Pump |
| Language | English |
To Next Page
