Contador 2 Operating Instructions
Page 6 of 46 Revision 7 © 2019 – Pfeuffer GmbH
1.2 Declaration of conformity CONTADOR 2
EC/EU Declaration of conformity
In accordance with the EC/EU Directives
Machinery 2006/42/EC and Electromagnetic Compatibility (EMC) 2014/30/EU
Manufacturer: Pfeuffer GmbH
Flugplatzstraße 70
97318 Kitzingen
GERMANY
Person responsible for collating the technical documentation: Lothar Pfeuffer, general manager
Product: Contador 2 Seed counter
Serial number: ______________________________
The aforementioned product complies with the requirements of the following relevant directives and
harmonised standards:
DIN EN ISO 12100:2010
Safety of machinery – General principles for design – Risk assessment and
risk reduction
DIN EN 60204-1:2006
Safety of machinery – Electrical equipment of machines;
Part 1: General requirements
DIN EN 61010-1:2011
Safety requirements for electrical equipment for measurement, control
and laboratory use; Part 1: General requirements
EU Directive: Electromagnetic compatibility
DIN EN 61000-6-2:2006
Electromagnetic compatibility – Part 6-2: Generic standards – Imission for
industrial environments
DIN EN 61000-6-3:2011
Electromagnetic compatibility – Part 6-3: Generic standards –
interference transmission for residential areas, business and industrial
premises as well as small-scale companies
DIN EN 61326-1:2013
Electrical equipment for measurements, control and laboratory use –
EMC requirements – Part 1: General requirements
In case of modification of the machine not in coordination with us this declaration expires.
Kitzingen, _______________________ _________________________________
Lothar Pfeuffer, general manager