Contador 2 Operating Instructions
© 2019 – Pfeuffer GmbH Revision 7 Page 9 of 46
1.6 Identification
The information provided in these Operating Instructions apply only for the machine whose type
designation is specified on the title page.
The type plate with the type designation can be found on the rear panel of the CONTADOR 2.
It is important that the correct type designation is specified if queries are made. This will help us to
process the query in a quick and efficient manner.
Sample Pfeuffer GmbH type plate:
Pfeuffer GmbH Tel. +49 9321 969-0
Flugplatzstraße 70 Fax +49 9321 969-50
97318 Kitzingen www.pfeuffer.com
Contador 2
S/N 00000000
Baujahr/YOM 0000
Spannung/Voltage 0000
Leistung/Power 0000
Sicherung/Fuse 0000
Made in Germany
2 Safety
NOTE
It is strictly prohibited to override the safety equipment or to change its function.
2.1 Installed safety systems
The installed safety systems must be checked at regular inspection intervals and using the appropriate
inspection methods. Refer to the following table:
d = daily
w = weekly
m = monthly
¼ y = quarterly
½ y = half-yearly
y = yearly
V = Visual check
F = Functional check
M = Measurement
2.1.1 Mains switch (plug/socket combination)
The CONTADOR 2 is designed as a portable machine with associated desktop power supply.
In the event of any
danger, disconnect the desktop power supply form the
CONTADOR 2.
To Next Page
Loading...
Need help?
General
