Pfister Avalon LG42-CB1 User Manual

Installation Support • Soporte de instalación • Support d’installation
Installation Videos Available
Videos de instalación a disposición
Vidéos d’installation disponibles
Personal Assistance, Product Specs, &
“How-to” Questions:
Asistencia personal, especificaciones del
producto y preguntas sobre “cómo hacerlo”:
Aide personnelle, spécifications du produit
et questions « pratico-pratiques » :
1800PFAUCET (7328238)
pisterfaucets.com/support
pisterfaucets.com/videos
465150300
Oct 11, 2018
Required Tools
Herramientas necesarias
Outils nécessaires
Additional Helpful Tools
Otras herramientas útiles
Outils supplémentaires utiles
1
Single Control Faucet
Grifo de solo control
Robinet de commande simple
Parts in the Box
Piezas en la caja
Pièces dans la boîte
Copyright © 2018, Pister Inc.
Safety Goggles
Anteojos de seguridad
Lunettes de sûreté
Adjustable Wrenches
Llaves ajustables
Clés â mollette
Flashlight
Linterna
Lampe De Poche
Cloth
Paño de limpieza
Chion
D
E
G
Items shown are not to scale.
De resultados no están a escala.
Produits aichés ne sont pas à l'échelle.
F
Quick Installation Guide
Guía de instalación rápida
Guide d’installation rapide
LG42-CB1
Avalon
™
WARNING / ADVERTENCIA / AVERTISSEMENT
To reduce the risk of injury or property damage, read all instructions before installing product. Wear safety goggles. Product must be installed in
accordance with all state & local plumbing & building codes. Call a professional if you are uncertain about installing this product.
Para disminuir el riesgo de lesiones o daños a la propiedad, lea todas las instrucciones antes de instalar el producto. Utilice gafas de seguridad. El producto
deberá instalarse de acuerdo con la normativa de plomería y construcción estatal y local. Llame a un profesional si no está seguro sobre cómo instalar este
producto.
Pour réduire le risque de blessures ou de dommages, lire toutes les instructions avant d’installer le produit. Porter des lunettes de sécurité. Le produit doit
être installé en conformité avec tous les codes de construction et de plomberie locaux et de l'état. Appelez un professionnel si vous n’êtes pas certain de la
façon d’installer ce produit.
Locate water supply inlets and shut of the water supply valves. These are usually
found under the sink or near the water meter. If you are replacing an existing faucet,
remove the old faucet from the sink and clean the sink surface thoroughly.
Ubique las entradas del suministro de agua y cierre las válvulas de suministro de agua.
Generalmente se encuentran debajo del fregadero o cerca del medidor de agua. Si se trata de
un reemplazo de grifo, quite el grifo viejo y limpie completamente la supericie del fregadero.
Recherchez les entrées d'approvisionnement et fermer leurs robinets. Ces robinets se
trouvent généralement sous l'évier ou près du compteur d’eau. Si vous remplacez un robinet
existant, retirez, le vieux robinet de l'évier et nettoyer soigneusement la surface de ce dernier.
Turn O Water Supply • Cierre el suministro de agua • Couper l’alimentation en eau
Hot
Caliente
Chaud
Cold
Fría
Froid
A
B
C
Optional Deck Plate (not included) see page 3,
Placa de cubierta opcional (no incluido), véase
la página 3.
Plaque de pont en option (non inclus), voir page 3.
1277303
SAMPLE COPY

Pfister Avalon LG42-CB1 Specifications

General

Brand	Pfister
Collection	Avalon
Model Number	LG42-CB1
Handle Style	Lever
Number of Handles	2
Mounting Type	Deck Mount
Flow Rate	1.2 GPM
Valve Type	Ceramic Disc
ADA Compliant	Yes
WaterSense Certified	Yes

Summary

Installation Support

Install Faucet without Deckplate

Faucet Body Alignment and Tightening

Ensure the spout body is centered and facing forward. Avoid overtightening the faucet body.

Mounting Bracket Orientation

Position the mounting bracket with bumps facing upwards for correct installation.

Install Faucet with Deckplate Option

Optional Deck Plate Reference

Consult the Maintenance & Care Guide for details on the optional deck plate and how to order it.

Faucet Body Alignment and Tightening

Ensure the spout body is centered and facing forward. Avoid overtightening the faucet body.

Mounting Bracket Orientation

Position the mounting bracket with bumps facing upwards for correct installation.

Connect Water Supply Lines

Water Supply Line Installation Guidance

Consult manufacturer instructions for correct installation of supply lines and fittings to prevent leaks.

Connect Hot and Cold Supply Lines

Firmly hand tighten the hot and cold water supply lines to the faucet connections.

Prepare & Install Push & Seal Drain

Disassemble Pop-Up Drain Components

Disassemble the pop-up drain body, ensuring all components are saved for reassembly.

Align Drain Body with Sink

Align the drain body's logo with the sink and partially thread it into the sink.

Avoid Plumber's Putty

Do not use plumber's putty as it may damage the drain seal.

Connect Drain to Sink and Tighten

Connect the drain to the sink and firmly hand tighten the securing nut.

Activate Drain Mechanism

Push to activate the drain mechanism after installation.

Remove and Set Limit Stop

Adjust Maximum Temperature Setting

Rotate the limit stop to set the desired maximum hot water temperature.

Turn On Water & Confirm Proper Installation

Check for Leaks After Water Activation

Turn on the water supply and check for any leaks above and below the sink.

Faucet Function

Operating the Faucet

Learn how to operate the faucet for hot and cold water flow.

Flush the Faucet

Remove and Reinstall Aerator

Remove the aerator, flush the faucet with hot and cold water, then reinstall.