Pfister Ashfield LF-049-YW2 User Manual

WARNING / ADVERTENCIA / AVERTISSEMENT
Installation Support • Soporte de instalación • Support d’installation
Turn O Water Supply • Cierre el suministro de agua • Couper l’alimentation en eau
Locate water supply inlets and shut o the water supply valves. These are usually
found under the sink or near the water meter. If you are replacing an existing faucet,
remove the old faucet from the sink and clean the sink surface thoroughly.
Ubique las entradas del suministro de agua y cierre las válvulas de suministro de agua.
Generalmente se encuentran debajo del fregadero o cerca del medidor de agua. Si se
trata de un reemplazo de grifo, quite el grifo viejo y limpie completamente la supericie del
fregadero.
Repérer les arrivées d’eau et fermer leurs robinets. Ces robinets se trouvent généralement
sous le lavabo ou à côté du compteur d’eau. En cas de remplacement d’un robinet existant,
le déposer du lavabo et nettoyer soigneusement la surface de ce dernier.
1
Quick Install
™
Tool
Personal Assistance, Product Specs, &
“How-to” Questions:
Asistencia personal, especiicaciones del
producto y preguntas sobre “cómo hacerlo”:
Aide personnelle, spéciications du produit
et questions « pratico-pratiques » :
1800PFAUCET (7328238)
pisterfaucets.com/support
Installation Videos Available
Videos de instalación a disposición
Vidéos d’installation disponibles
pisterfaucets.com/videos
To reduce the risk of injury or property damage, read all instructions before installing product. Wear safety goggles. Product must be installed in accordance
with all state & local plumbing & building codes. Call a professional if you are uncertain about installing this product.
Para disminuir el riesgo de lesiones o daños a la propiedad, lea todas las instrucciones antes de instalar el producto. Utilice gafas de seguridad. El producto deberá
instalarse de acuerdo con la normativa de plomería y construcción estatal y local. Llame a un profesional si no está seguro sobre cómo instalar este producto.
Pour réduire le risque de blessures ou de dommages, lire toutes les instructions avant d’installer l’appareil. Porter des lunettes de sécurité. Il faut installer l’appareil en
respectant tous les codes de construction et de plomberie locaux et d’État. Appelez un professionnel si vous n’êtes pas certain de la façon d’installer cet appareil.
Required Tools
Herramientas necesarias
Outils nécessaires
Parts in the Box
Piezas en la caja
ieces dans la boîte
Additional Helpful Tools
Otras herramientas útiles
Outils supplémentaires utiles
Adjustable Wrench
Llave ajustable
Clé réglable
8" - 20" Widespread Faucet
Grifo de largo alcance de 8 a 20 pulgadas
Robinet Élongé de 8 à 20 po
Quick Installation Guide
Guía de instalación rápida
Guide d’installation rapide
Flashlight
Linterna
Lampe De Poche
Cloth
Paño
Chion
Safety Goggles
Gafas de seguridad
Lunettes de sûreté
Bucket
Balde
Seau
Hot
Caliente
Chaud
Cold
Fría
Froid
Copyright © 2019, Pister Inc.
1295407
A
J
(x2)
E
G
L
C
(x2)
K (x2)
B (x2)
D (x2)
F
H
M
475040500
June 6, 2019
LF049YW2
Ashield
™
SAMPLE COPY

Pfister Ashfield LF-049-YW2 Specifications

General

Finish	Rustic Bronze
Material	Brass
Number of Handles	2
Flow Rate	1.2 GPM
Installation Type	Widespread
Style	Traditional
Handle Style	Lever
Valve Type	Ceramic Disc
Spout Reach	4.5 inches
Product Type	Bathroom Sink Faucet

Summary

Pfister Ashfield Faucet Installation Guide

Support and Contact Information

Provides phone numbers, website, and video links for installation assistance.

Safety Warnings and Precautions

Advises users to read instructions, wear safety goggles, and follow codes.

Required Tools and Parts

Lists necessary tools and identifies all included parts for installation.

Step 1: Turn Off Water Supply

Instructions on locating and shutting off water valves before installation.

Install Valve Bodies

Disassemble and Prepare Valves

Steps for taking apart the valve cartridges and preparing them for installation.

Install Valve Bodies

Guides on inserting and securing the hot and cold valve bodies into the faucet base.

Handle Rotation Check

Ensures handles rotate correctly before final tightening for proper function.

Valve Body Installation Notes

Specific instructions for thin counter installations and parts not always required.

Install Handles and Spout

Assemble Faucet Components

Instructions for connecting the handles and spout to the valve bodies.

Install Spout

Steps for mounting the spout onto the faucet base and securing it.

Secure Handles and Spout

Details on how to attach and tighten the handles and spout assembly.

Install Drain Hose

Connect Drain Hose

Guides on connecting the flexible drain hose to the faucet's waste outlet.

Check Hose Connection Security

Verifies the secure attachment of the drain hose to prevent leaks.

Connect Water Supply Lines

Prepare for Water Supply

Guides lines into bucket and prepares for turning water on and flushing.

Flush Water Lines

Instructions to run water for 30 seconds to clear debris before final connection.

Connect Supply Lines to Valves

Steps to firmly attach and tighten water supply lines to the faucet valves.

Install Push & Seal™ Drain

Disassemble and Prepare Drain Body

Steps to take apart the drain assembly and prepare it for sink installation.

Install Drain Body to Sink

Guides on threading the drain body into the sink and hand-tightening the nut.

Drain Connection and Sealing

Instructions on connecting the drain to plumbing and avoiding plumber's putty.

Final Checks and Operation

Turn On Water and Check for Leaks

Instructions for turning on the water supply and verifying all connections for leaks.

Confirm Proper Installation

Final check to ensure the faucet is installed correctly and functioning as expected.