Do you have a question about the Pfister Zanna F-529-7ZNR and is the answer not in the manual?
Brand | Pfister |
---|---|
Model | Zanna F-529-7ZNR |
Category | Plumbing Product |
Language | English |
Contact Pfister for personal assistance, product specifications, and 'how-to' questions.
Read all instructions before installing; wear safety goggles; follow plumbing and building codes.
Lists necessary tools like adjustable wrench and safety goggles, plus helpful items.
Visual guide to identify all included parts for faucet installation.
Find and close water supply valves and prepare the sink for faucet removal or installation.
Apply plumber's putty and install the spout (Part A) and plate (Part D) onto the sink.
Assemble faucet body with washers (E, F, G) and connect to water supply lines.
Apply plumber's putty and install spout (Part A), deckplate (Part B), and gasket (Part C).
Assemble faucet body with washers (E, F, G) and connect to water supply lines.
Disassemble the weight (H1) and prepare it for attachment to the pull-down hose.
Install the weight (H1) onto the pull-down hose using the locator tape (H2).
Connect hot water line to left inlet (red clip) and cold water line to right inlet (blue clip).
Loop and secure water supply lines as necessary to ensure proper function and prevent kinks.
Disassemble dispenser components and mount the base onto the sink.
Connect dispenser tube, fill reservoir with soap, and finalize placement.
Turn on water supply and check for leaks above and below the sink.
Allow full hot and cold water to run for at least 15 seconds each to flush the system.
Learn how to switch between spray and stream modes and pause the spray.
Details on how to operate the faucet using one hand or two hands.