3)7*67$1'$5' 86$
3URFHGXUHVIRU FOHDQLQJKRVHEORFN D JHV
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
________________________________________________________________________________________
:$51,1*
In accordance with the accident prevention regulations of the employer liability
authorities, personnel entrusted with clearing blockages must war protective goggles
for safety reasons and must take proper safety precautions to avoid injury from the
discharging mortar. Other persons must not be in the vicinity of the machine.
- Switch OFF star wheel motor (1),
- run pump motor briefly backwards by turning pole reversing switch,
- "red lamp change direction of rotation" goes on,
- cover outlet of pump tube with foil.
- Press blue pressure button (4) "run pump motor backwards" (water supply is
automatically interrupted) until pressure at mortar pressure gauge is at 0 bar.
- Release the nuts on the pressure flange slightly so that any residual pressure can
completely escape.
- Release the hose coupling and clean the hose.
To squeeze out residual mortar of the mortar hoses insert water hose into mortar hose
and flush out mortar.
(see 301 00 422 → cleaning hoses)
.
To Next Page
Loading...
