PGO TR3-50 - Warm up the Engine

To Next Page

To Previous Page

6.2 WARM UP THE ENGINE

To protect the engine, please warm up the engine 1～3 minutes before riding. Do not

immediately accelerate when engine is cold.

Note :

Please read the instruction “ engine initial run-in “ page 29 before initial riding.

SCOOTER RIDING (AFTER WARM UP THE ENGINE ):

(1) Hold the brake lever and push down the central stand.

(2) Adjust the angle of rear view mirrors within visible field.

(3) Try the function of signal light before riding.

(4) Turn the throttle grip gradually then close the signal light during riding

ACCELERATING ( THROTTLING ) :

Use the throttle grip control your cruise turning it toward your side will speed up, and

reversing it will slow down.