4. FUNCTION OF EACH CONTROLLER
MAIN SWITCH:
The main switch controlling the ignition and lighting -
system the operation methods are shown on the
following:
ON:
Electrical circuit is connected and engine can be started. At this moment, the key can’t
be pulled out.
OFF:
All electrical circuits are cut, at this moment, the key can be pulled out.
LOCK:
In this position, the handle comp. can be locked and key can be pulled out. Please refer
to page 11“Handle lock operation＂
Note:
Please turn to“OFF＂or“LOCK＂(Pull out the key) location when park the scooter.
6
To Next Page
Loading...