37
1.When checking the oil level, please turn the handle bar assuring the brake oil on the
horizontal position.
2.Use correct brake oil, otherwise the oil seal will be defected. This will cause the oil leaking
& losing the brake function. Standard brake oil:
FMVSS DOT or SAE J1703
3.Refill same kind of brake oil. Mixing with different oils will yield a bad reaction and cause the
brake out of order.
4.To avoid the water getting into the main cylinder, Otherwise the boiling temperature of the
brake oil will be declining make the air be obstructed.
5.Brake oil could erode the painting surface and plastic parts. If any oil be spilled out, please
clean it immediately.
6.If the brake oil can’t be refilled to the standard level, please check with your dealers.
7.Checking the pad (Drum Brake Only)
To Next Page
Loading...