Need help?Do you have a question about the PGST CT-PG-100 and is the answer not in the manual?
General| Brand | PGST |
|---|---|
| Model | CT-PG-100 |
| Category | Security System |
| Language | English |
Highlights mobile communication, defense zones, and remote control capabilities.
Details LCD display, voice/SMS prompts, timing functions, and phone number storage.
Covers intercom, smart home integration, event logging, and backup power.
Recommends optimal placement away from interference sources.
Identifies indicators and ports on the front and back of the host unit.
Explains how to connect wired accessories and power supply.
Details installation height, angle, mounting, and environmental considerations.
Covers sensor placement, magnet alignment, and installation checks.
Guides on initial setup, SIM insertion, and entering system settings.
Procedure for coding wireless remote controllers with the alarm host.
Covers coding, deleting single, and deleting all wireless detectors.
Sets alarm behavior for wireless and wired defense zones.
Configures wireless siren coding and remote operation voice prompts.
Assigns alarm types to specific wired defense zones.
Sets siren ring time, arm delays, and telephone dial-up cycles.
Configures remote call ringing times and the recording function.
Details procedures for changing user and administrator passwords.
Enables keypad lock and timing arm/disarm functions.
Sets automatic arming schedules and performs a system reset.
Covers inquiry and deletion of host alarm logs.
Configures SMS alerts for arming and disarming events.
Setup and deletion of phone numbers for SMS notifications.
Setup and deletion of phone numbers for alarm calls.
Assigns specific alarm types to defense zones (e.g., SOS, fire).
Verifies the GSM signal strength for reliable communication.
Sets the duration for which the LCD backlight remains active.
Adjusts system sound volume and selects the interface language.
Guide for downloading and installing the 'GSM alarm system' mobile application.
Steps to add and delete the alarm host account within the app.
Navigating the app for arming, disarming, monitoring, and settings.
Instructions for arming the system when leaving the premises.
Procedure for arming the system when staying at home.
How to deactivate the alarm system and stop alarms.
Steps for answering and interacting with the host during an alarm call.
Using SMS commands or phone calls for remote system control.
Manual activation of the emergency alarm via host or remote.
Recommendations for routine inspection of the host and detectors.
Verifying arm/disarm, dialing, signal reception, and detector status.
Warnings against modification, damage, and misuse of emergency numbers.
Lists electrical, frequency, and battery specifications of the host.
Details defense zones, arm modes, siren, passwords, and remote control status.
A table of setup items, addresses, data, and default values for configuration.
To Next Page