Phantomgogo A8 - Fault Code Troubleshooting; Troubleshooting Fault Codes

17
Fault Code
Code
Description of
Fault Content
Solution
Corresponding
Parts
E0
Undervoltage,
low battery
Please charge in time.
Battery
E1
Overvoltage,
too high battery
Needs to unplug the
charger.
Battery
E2
Controller Fault Controller needs to be
replaced.
Controller
E3
MOS Tube Fault
After 15 minutes of
shutdown, restart to conrm
whether the fault is resolved;
if not, the controller needs to
be replaced.
Controller
04
Hardware
Communication
Fault
Check the connection line
between the controller and
the display, if the connection
is normal, but the fault is
not resolved, please call the
manufacturer.
Controller /
Display
05
Hall Fault
Check the Hall wire between
the controller and the motor.
If the connection is normal,
but the fault is not resolved,
the motor needs to be
replaced.
Motor
06
Accelerator Fault
Check the accelerator
shift connection cable, if
the connection is normal,
whether the fault is resolved;
if not, replace the shift.
Accelerator