3
Specifications
Assembly
1. Pull the folding handle upwards until an audible click is heard,
then pull the folding handle confirming the lock is in place.
2. Manually connect the handlebar and data cable in the front tube.
Once connected, check if the scooter powers on normally.
3. Use the included 6 screws to fasten the handlebars. Further
tighten the screws by using the T-shape allen key.
2 3
1
Model A8
Net weight 33 lbs
Unfolded size 45.5× 7.5×19 inch
Recommended age 12+
Recommended height 51~78 inch
Maximum load 220 lbs
Maximum speed 15.5 mph
Mileage 28 miles
Gradeability About 15%
Waterproof certification IPX5
Charging time About 5.5 hours
BMS management
Over-charge, Over-temperature, Over-discharge,
Over-current, Short circuit, Over-voltage
Brake system Manual disc brake + Electronic brake
Tire size
9-inch puncture-proof tubeless tires
To Next Page
Loading...