EasyManua.ls Logo

Phasak PH 9220 - User Manual

Phasak PH 9220
58 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SAI/UPS On-Line Torre/Tower. 1000/2000/3000VA
PH 9210 PH 9220 PH 9230
LEA AL MENOS ESTO
Siga estrictamente todas las advertencias e instrucciones de este
manual.
Antes de instalar esta unidad, lea todas las instrucciones
atentamente.
No utilice este SAI antes de leer atentamente toda la información
de seguridad y las instrucciones de uso.
PELO MENOS LEIA ISTO
Siga estritamente todas as advertências e instruções deste
manual.
Antes de instalar esta unidade, leia todas as instruções
atentamente.
Não utilize esta UPS antes de ler atentamente toda a informação
de segurança e as instruções de uso.
AT LEAST READ THIS
Follow all warnings and instructions in this manual strictly.
Before installing this unit, read all instructions carefully.
Do not use this UPS before reading all safety information and
operating instructions carefully..

Other manuals for Phasak PH 9220

Preview: User Manual
User Manual52 pages

Questions and Answers

  • H
    hallmichaelAug 9, 2025
    What to do if my Phasak PH 9220 shows fault code 43 and the alarm is sounding?
    • D
      Donald MurphyAug 10, 2025
      If your Phasak UPS displays fault code 43, it means the UPS shut down automatically due to an overload at the output. Remove some of the connected devices from the UPS output and then restart the UPS.
  • J
    Jerry DavisAug 26, 2025
    What does it mean when my Phasak PH 9220 UPS shows fault code 14 and the alarm is sounding?
    • H
      hannawilliamAug 26, 2025
      If your Phasak UPS is showing fault code 14, it indicates that the UPS shut down automatically because of a short circuit on the output. You should check the output wiring and the devices connected to see if any are causing a short circuit.

Phasak PH 9220 Specifications

General IconGeneral
BrandPhasak
ModelPH 9220
CategoryUPS
LanguageEnglish

Related product manuals